D-Link DWL-7230AP - xStack - Wireless Access Point Quick Installation Manual

Xstack 802.11a/g access point with poe
Hide thumbs Also See for DWL-7230AP - xStack - Wireless Access Point:

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DWL-7230AP - xStack - Wireless Access Point

  • Page 2: System Requirements

    • Power Cord • 48V/0.4A Power Adapter • Rubber Feet This access point can only be used with a D-Link xStack 3200-series wireless switch. Please refer to the xStack user manual for configuration of the access point. D-Link DWL-7230AP Quick Install Guide...
  • Page 3: Installation Considerations

    Installation Considerations D-Link wireless devices allow you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.
  • Page 4: Front Panel

    Front Panel WLAN Blinking green indicates wireless network activity. Power A solid light indicates A blinking light indicates data is being the unit is properly transmitted via the Ethernet port. powered. D-Link DWL-7230AP Quick Install Guide...
  • Page 5: Rear Panel

    Pressing this button restores the Access Point to its original factory default settings. Power Receptor Ethernet Port Used to connect the supplied Connects the DWL-7230AP power adapter. to the xStack switch using an Ethernet cable. D-Link DWL-7230AP Quick Install Guide...
  • Page 6: Warranty

    D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 7 Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
  • Page 8 Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
  • Page 9 D-Link Corporation/ D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.
  • Page 10 Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. D-Link DWL-7230AP Quick Install Guide...
  • Page 11 Notes D-Link DWL-7230AP Quick Install Guide...
  • Page 12: Technical Support

    Copyright ©2006 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary.

Table of Contents