D-Link DWL-7200AP Quick Installation Manual
D-Link DWL-7200AP Quick Installation Manual

D-Link DWL-7200AP Quick Installation Manual

Ag tri-mode dualband wireless access point
Hide thumbs Also See for DWL-7200AP:

Advertisement

Quick Links

This product can be set up using
This product can be set up using
This product can be set up using
This product can be set up using
This product can be set up using
an any curr
an an
y curr
y curr
y curren
en en
en ent W
t W
t Web br
t W
eb br
eb browser
eb br
an
y curr
t W
eb br
Internet Explorer 6 or Netscape
Internet Explorer 6 or Netscape
Internet Explorer 6 or Netscape
Internet Explorer 6 or Netscape
Internet Explorer 6 or Netscape
N N N N N avi
avi
avi
gator 6.2.3 or later
gator 6.2.3 or later. . . . .
gator 6.2.3 or later
avi
avigator 6.2.3 or later
gator 6.2.3 or later

Before You Begin

The default IP address for the DWL-7200AP is
255.255.255.0. For the purpose of configuring the DWL-7200AP you will need to assign
your computer a static IP address within the same range as the DWL-7200AP's IP
address. See the Manual on the CD-ROM if you need assistance in assigning a static
IP address for your network adapter.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
owser, i.e
owser
owser
, i.e., ., ., ., .,
, i.e
, i.e
owser
, i.e
DWL-7200AP AirPremier
Wireless Access Point
CD-ROM with Manual
Ethernet (CAT5e UTP/Straight-Through) Cable
PoE Base Unit

Power Cord

Power Adapter
Software and specifications subject to change without notice. DWL-7200AP. 09102004
DWL-7200AP
D-Link Air Premier
Tri-mode Dualband Wireless
192.168.0.50
with a subnet mask of
AG
Using a power adapter
with a different voltage
rating will damage and void
the warranty of this product.
TM
AG
Access Point

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DWL-7200AP

  • Page 1: Before You Begin

    If any of the above items are missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-7200AP. 09102004 , i.e., ., ., ., .,...
  • Page 2: Hardware Overview

    Hardware Overview Front Panel Power LED: the unit is powered on. WLAN LEDs: A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. Indicates Link/Act LEDs: or 100M Link to the LAN port. Activity is indicated when blinking.
  • Page 3: Rear Panel

    Hardware Overview (continued) Rear Panel LAN Port Connects to a PC, switch, router, or PoE base unit using an Ethernet cable. 2.4GHz Antenna Used to wirelessly connect to 802.11b/g devices. Reset Button Pressing this button restores the access point to its original factory default settings.
  • Page 4 PoE (Power over Ethernet) base unit. To connect power directly to the DWL-7200AP, please follow the steps on this page. To use the PoE base unit, please follow the steps on the next page.
  • Page 5 Step 1: Connect one end of an Ethernet cable (included with your package) to the LAN port on the DWL-7200AP and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit. •...
  • Page 6 Connecting The DWL-7200AP To Your Network (continued) When you have completed the steps in this network should look similar to this: Quick Installation Guide, your connected...
  • Page 7: Using The Setup Wizard

    Using The Setup Wizard Open your Web browser and type http://192.168.0.50 into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type admin for the User name and leave the Password field blank. Click...
  • Page 8 Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard Click Next...
  • Page 9 You can change these settings to match an existing wireless network. Click Next WEP Encryption for 802.11a The DWL-7200AP is capable of 64-bit, 128-bit, and 152-bit encryption. Keys may be entered in HEX (0-9, A-F) or ASCII format. Select the key type and size you wish to use and enter the key in the field provided.
  • Page 10 Click Next WEP Encryption for 802.11g The DWL-7200AP is capable of 64-bit, 128-bit, and 152-bit encryption. Keys may be entered in HEX (0-9, A-F) or ASCII format. Select the key type and size you wish to use and enter the key in the field provided.
  • Page 11 For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM. For managing several DWL-7200AP’s, please utilize the D-Link AirPremier firmware or AP manager, please go to http://support.dlink.com...
  • Page 12 You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.

This manual is also suitable for:

Airpremier dwl-7200ap

Table of Contents