D-Link DWL-7200AP Manual page 28

Using the Configuration Menu (continued)
DHCP Server
Control-
Enable or
Disable the DHCP
function here.
Static Pool
Settings-
Assigned lP-
Enter the static IP
address of the
device here.
Assigned MAC
Address-
Enter the MAC
address of the
device here.
SubMask-
Enter the subnet
mask here.
Gateway-
Wins-
DNS-
Domain Name-
Status-
Assigned
Static Pool-
Apply-
Advanced > DHCP Server > Static Pool Settings
Function Enable/Disable
Enter the IP address of the router on the network.
Windows Internet Naming Service is a system that determines
the IP address of the a network computer that has a dynamically
assigned IP address.
Enter the IP address of the DNS server. The DNS server translates
domain names such as www.dlink.com into IP addresses.
Enter the Domain Name of the DWL-7200AP.
Turn the Static Pool Settings ON or OFF here.
After you have input the Static Pool Settings for each device,
click Apply and the profile will appear in this list at the bottom of
the window.
Click Apply if you have made any changes.
28