Canceling Unused Wireless Monitors; Replacing Batteries Or Battery Packs; Cleaning - Panasonic VL-SDM200A Operating Instructions Manual

Wireless door camera
Table of Contents

Advertisement

Useful Information

Canceling unused Wireless Monitors

R These operations are performed on the included Wireless Monitor, and can also be performed on the
additionally paired Wireless Monitor.
R The pairing of the Wireless Monitor performing operations cannot be canceled.
1
Press MMENUN.
2
Select "ALL SETTINGS" by pressing MDN, MCN, MFN, or MEN, then press M
3
Select "PAIRING/CANCEL" by pressing MDN or MCN, then press M
4
Select "CANCELATION" by pressing MDN or MCN, then press M
5
Select "MONITOR" by pressing MDN or MCN, then press M
6
Select the Wireless Monitor to cancel by pressing MDN or MCN, then press M
("OK").
R In the following situations, Wireless Monitors are displayed in gray and cannot be canceled.
– when trying to cancel the pairing of a Wireless Monitor that is performing operations.
– when there is a Wireless Monitor that has not been paired.
7
To finish the operation, press MMENUN 2 times.
Important:
R In order to prevent false operations, remove the battery packs from canceled Wireless Monitors.

Replacing batteries or battery packs

n Batteries used in the Wireless Camera
When the batteries of the Wireless Camera run out of power (
R ONLY USE Alkaline AA batteries.
R Refer to page 19 for information on how to insert batteries.
R To prevent the Wireless Camera from falling down, make sure to close the door and turn off the
power of the Wireless Camera before replacing batteries.
n Battery pack used in the Wireless Monitor
When the Wireless Monitor's battery pack runs out of power soon after being charged, exchange it with a
new battery pack.
R Use the separately sold CGA-LB102 for a replacement battery pack (page 4).
– Battery specifications: lithium ion battery, DC 3.7 V, 940 mAh.
R Refer to page 15 for information on how to insert battery packs.

Cleaning

R Clean the unit with a soft, dry cloth. For excessive dirt, wipe the unit with a slightly damp cloth.
R When cleaning the Base Unit, electrical parts, and power plug, make sure to unplug the power plug
from the power outlet.
30
N (monitor button) ("OK").
N (monitor button) ("OK").
N (monitor button) ("OK").
N (monitor button) ("OK").
N (monitor button)
), exchange them with new batteries.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vl-cm851aVl-dm200aVl-mdm200a

Table of Contents