Panasonic WV-SC385 Installation Manual
Wvsc385 user guide
Hide thumbs
Also See for WV-SC385:
- Installation manual (40 pages) ,
- Specifications (2 pages) ,
- Operating instructions manual (244 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Panasonic WV-SC385
Summary of Contents for Panasonic WV-SC385
-
Page 1: Network Camera
Installation Guide Network Camera WV-SC385 Model No. WV-SC385E L O C K O P E N Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. - Page 2 We declare under our sole responsibility that the product to which this Wij verklaren als enige aansprakelijke, dat het product waarop deze declaration relates is in conformity with the standards or other verklaring betrekking heeft, voldoet aan de volgende normen of andere normative documents following the provisions of Directives 2006/95/ normatieve documenten, overeenkomstig de bepalingen van Richtlijnen EC and 2004/108/EC.
-
Page 3: Table Of Contents
Contents Important safety instructions ............................. 4 Limitation of liability ................................5 Disclaimer of warranty ............................... 5 Preface ....................................6 Main functions ................................... 6 About the user manuals ..............................7 System requirements for a PC ............................7 Trademarks and registered trademarks..........................8 About copyright and license.............................. -
Page 4: Important Safety Instructions
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 5: Limitation Of Liability
THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;... -
Page 6: Preface
Preface The network camera WV-SC385 is designed to operate using a PC on a network (10BASE-T/100BASE-TX). By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a net- work. -
Page 7: About The User Manuals
About the user manuals There are 2 sets of operating instructions for the WV-SC385 (NTSC model), WV-SC385E (PAL model) as follows. • Installation Guide: Explains how to install and connect devices, as well as how to connect and configure the network. •... -
Page 8: Trademarks And Registered Trademarks
Trademarks and registered trademarks • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX and DirectX are either registered trademarks or trade- marks of Microsoft Corporation in the United States and/or other countries. • Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. •... -
Page 9: Precautions
Precautions Refer installation work to the dealer. The exclusively designed mount bracket shall be Installation work requires technique and experiences. used. Failure to observe this may cause fire, electric shock, Failure to observe this may cause a drop resulting in injury injury, or damage to the product. - Page 10 Do not touch the transparent part (over the lens) • When using an unformatted SDHC/SD memory card, with your bare hands. format it using this product. Recorded data on the The dirty part causes deterioration of picture quality. SDHC/SD memory card will be deleted when format- ted.
- Page 11 AVC Patent Portfolio License This product is licensed under the AVC Patent Portfolio License for the personal and noncommercial use of a con- sumer to (i) encode video in compliance with the AVC Standard ("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video.
-
Page 12: Precautions For Installation
Precautions for installation No responsibility will be taken by our company with Procure fixing screws separately. respect to consequeces resulting from the use, The screws that secure this product are not supplied. damage or both of the camera. Prepare them according to the material and strength of the area where the product is to be installed. -
Page 13: Major Operating Controls
Camera mount bracket (accessory) FRONT Safety wire (fixed with the mount bracket) LO CK O P E N Decorative cover (accessory) Camera Front view Transparent part (over the lens) WV-SC385 WV-SC385 SDHC/SD memory card slot cover SDHC/SD memory card slot Panasonic logo plate... -
Page 14: Rear View
Rear view INITIAL SET button Cable guide Access indicator (blinking at accessing) Audio output connector 10BASE-T/ Link indicator 100BASE-TX POWER LINK INITIAL EXT I/O AUDIO OUT MIC/LINE IN MONITOR OUT Monitor out connector (lighting at linking) for adjustment 12V IN 4 3 2 1 Network connector Safety wire holder... -
Page 15: Installations/Connections
Installations/Connections Caution: • FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. The following are descriptions of how to install the camera. The camera can be installed on a ceiling. The camera can also be installed upside down on the bracket or can be placed upside down on a desktop. Before starting the installation/connection, prepare the required devices and cables. -
Page 16: Camera Mount Bracket (W/Safety Wire)
Wire through a hole in the ceiling Step 1 Step 3 Fix the camera mount bracket (accessory) with four Insert the SDHC/SD memory card into the SDHC/SD optional fixing screws (M4 or M6, option). memory card slot. Refer to page 24 for how to insert the There should be no obstacles such as wall in a range of SDHC/SD memory card. - Page 17 Specification of cable (wire): AWG #22 - #28, Single core, twisted Important: Strip range • Connect/disconnect the audio cables and turn on the power of the camera after turning off the power of the EXT I/O terminal 2 (ALARM IN2/ALARM OUT) Approx.
- Page 18 Center of the Step 8 camera mount bracket Connect the cables to the network connector and the power inlet. Important: • When the power of the camera is turned on, the cam- era will start panning and the position will automati- Base part Guide part cally be initialized.
-
Page 19: Decorative Cover
• 12 V DC power supply terminal Step 9 q Loosen the screw of the power cord plug (accessory). After completing the cable connections, attach the deco- w Connect the cable of the 12 V DC power supply* to rative cover (accessory). the power cord plug. - Page 20 Wire without making a hole in the ceiling Step 1 Install the camera by following step 1 and steps 3 - 8 of the "Wire through a hole in the ceiling" section (☞ pages 16 - 18). It is unnecessary to make a hole in the ceiling as described in step O P E 2 of the "Wire through a hole in the ceiling"...
- Page 21 Place the camera upside-down on a desktop without fixing Use it as a simple desktop device at meetings and on other occasions. Place the camera on a level place not subject to vibrations. Ensure that the camera does not fall. When using the camera upside-down, select "On (desktop)"...
-
Page 22: Connection Example
Connection example When connecting with a PC directly Speaker with amplifier (option) LAN cable Microphone (option) (category 5 or better, cross, STP*) To AC outlet <Required cable> LAN cable (category 5 or better, cross, STP*) * PAL model only When connecting to a network using a PoE hub Video monitor (for adjustment use only) Speaker with amplifier... -
Page 23: Detach The Camera
Detach the camera The camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instructions below. The following is an example of installation on the ceiling. Important: • Do not detach the camera in a different way from the one described below. It may damage the camera. Step 1 Rotate the decorative cover (accessory) counterclockwise until the indication "OPEN"... -
Page 24: Insert/Remove An Sdhc/Sd Memory Card
Step 1 Step 4 Push the left corner of the Panasonic logo plate on the Shut the SDHC/SD memory card slot cover and lock the front panel to unlock the SDHC/SD memory card slot cover by pushing the Panasonic logo plate. - Page 25 Step 2 Push the SDHC/SD memory card until a click is heard and then pull the SDHC/SD memory card from the slot. Step 3 Shut the SDHC/SD memory card slot cover and lock the cover by pushing the Panasonic logo plate.
-
Page 26: Configure The Network Settings
When using multiple cameras, it is necessary to configure the network settings of each camera independently. If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually on the "Network" page of the setup menu. Refer to the Operating Instructions (PDF) for further information. - Page 27 Step 1 Step 3 Start the Panasonic IP setting software. Complete each network setup item and click the [Save] button. Step 2 Click the [Network Settings] button after selecting the MAC address/IP address of the camera to be configured. Note: •...
-
Page 28: Troubleshooting
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Reference Symptom Cause/solution pages When using DC power supply... - Page 29 Operating Or install the software to format the SDHC/SD memory card on Live indicator lights red. Instructions the PC. Refer to our website (http://panasonic.net/pcc/support/ (PDF) netwkcam/support/info.html) for further information about the sup- ported software. • Isn't the inserted SDHC/SD memory card faulty?
- Page 30 About the live indicator The live indicator will light or blink as follows depending on the camera status. Operation status Indicator status When the power is turned on Before the network Blinks orange connection is established When the network Blinks orange → Blinks green → Lights green connection is established During the standby or connection (Cable is not connected.) Lights orange...
-
Page 31: Specifications
Specifications • Basic Power source: 12 V DC, PoE (IEEE802.3af compliant) Power consumption: 12 V DC*: Approx. 1 A, PoE: Approx. 12 W (Class 0 device) * FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} Ambient operating humidity:... - Page 32 Camera title on screen: On/Off Up to 20 characters (alphanumeric characters, marks) Character size: Large/Middle/Small Video motion detection (VMD alarm): On/Off, 4 areas available Image hold: On/Off Upside-down: On (desktop)/Off (ceiling) • Lens Zoom ratio: Extra Optical Zoom Max 36x (under VGA) Digital (electronic) zoom: 12x (Max 432x combined with Extra Optical Zoom under VGA) Focal length:...
- Page 33 (Including the camera itself) Compatible SDHC/ SD memory card (option): Manufactured by Panasonic SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card)
-
Page 34: Standard Accessories
Standard accessories Installation Guide (this document) ........1 pc. Warranty card (NTSC model only) ........1 pc. CD-ROM* ................1 pc. * The CD-ROM contains the operating instructions (PDFs) and different kinds of tool software programs. The following parts are used during installation procedures. Camera mount bracket (w/safety wire) ......1 pc. - Page 35 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
- Page 36 For customer support, call 1.800.528.6747 Importer's name and address to follow EU rules: Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. Panasonic Testing Centre Panasonic Canada Inc. Panasonic Marketing Europe GmbH 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada Winsbergring 15, 22525 Hamburg F.R.Germany...