Table of Contents
Advertisement
How to use
Wide display
(default setting)
1
Press and hold M
R The display is switched to the Zoom display.
R To switch back to the Wide display, press and hold M
again.
2
To change the Zoom position with Pan/Tilt, press MDN, MCN, MFN, or MEN when in the Zoom display.
R The Zoom position changes each time MDN, MCN, MFN, or MEN is pressed.
Example:
A
In the illustration above, the Zoom position is shown in gray.
– Press MFN 1 time: the Zoom position is moved to (A).
– Press MCN 1 time: the Zoom position is moved to (B).
R The Zoom position can be moved in the direction of the symbols shown on the screen.
Note:
R Performing the above operations only temporarily switches between Wide/Zoom displays. Therefore,
images will be displayed according to the default settings the next time images are monitored. To
change the default settings, change "WIDE/ZOOM SETTINGS" (page 27).
R When the Zoom position is changed, it is retained and used the next time images are monitored.
Recording displayed images
Images being monitored can be recorded.
R Each recorded picture records 1 still image picture. (A maximum of 10 recorded pictures can be
recorded.)
24
N (Monitor button) for about 3 seconds when in the Wide display.
B
Zoom display
N (Monitor button) for about 3 seconds
Advertisement
Table of Contents
