Table of Contents
Advertisement
Operating Instructions
Wireless Remote Control (optional accessory)
You can operate the unit with the optional wireless remote control (AW-RM50AG).
Consult your dealer concerning the purchase of a wireless remote control.
Buttons used for operating this unit are described.
1
2
3
4
5
6
7
8
9
10
Signal transmission window
1
ON/STANDBY button
2
11
Each time this is pressed for 2 seconds, operation
switches between turning on the unit's power and
establishing the standby status.
CAMERA 1 to 4 buttons
3
Selects a camera to be operated.
Once a button has been selected, the unit
corresponding to the selected button can be operated.
SET button
4
If this button is pressed when the [AWB A] memory or
[AWB B] memory has been selected for the white
balance adjustment, the white balance is
12
automatically adjusted and registered in the selected
memory.
MODE button
5
Each time you press the button, the signal switches
between the color bar signal output and the camera
image output.
13
GAIN buttons [OFF] [LOW] [HI] [AUTO]
6
14
These are used to set the gain.
The gain increase can be set in three steps using the
[OFF], [LOW] and [HI] buttons.
[OFF] is set to 0 dB, [LOW] is set to 9 dB, and [HI] is
set to 18 dB.
When the [AUTO] button is pressed, the AGC function
is activated, and the gain is adjusted automatically
depending on the light quantity.
The maximum gain of the AGC function can be set
using the camera menu.
1 to 12 buttons
7
These are used to call the information on the unit's
directions and other settings, which have been
registered in the units preset memories No.1 to No.12,
and reproduce those settings.
Setting in preset memories No.13 and above cannot
be called from the wireless remote control.
PRESET button
8
Press this button and any of the buttons from 1 to 12
simultaneously to register a preset memory.
75
Advertisement
Table of Contents
