Receiving Calls - BT Diverse 2010 User Manual

Making and

receiving calls

To make an external call
Ensure the handset is switched ON.
• Press the
PHONE
the dial tone. The 'In Use' light on the
base station comes on.
• Dial the number. The phone calls the
number and the display shows the
number you have dialled.
Alternatively, you can enter the phone
number you want first, check that it is
correct, and then press the
button to dial.
If another handset is already being used to
make an external call, your handset will
display '—-' f lashing and you will hear the
internal 'busy' signal.
To end a call
• Press the
END CALL
Or
• Place the handset back on the base
station.
To receive an external call
When the phone rings the display
flashes EXT.
• Press the
PHONE
handset and speak.
button. You will hear
PHONE
button.
button on the
Or
• If the handset is on the base station or
charging station, simply lift it up and
speak. You do not need to press the
button.
PHONE
• At the end of the call, either press
the
END CALL
handset on the base station.
To redial the last external number
LNR
• Press the
PHONE
• Press the LNR button. The last
external number you called will be
redialled automatically.
• Press the
END CALL
of your call, or replace the handset on
the box.
To redial any of the last 5 external
numbers
LNR
• Press and release the
the number you want is displayed.
• Press the
PHONE
• To end the call, press the
button or replace the handset on the base.
Call timer
Your Diverse 2010 automatically times
the duration of all external calls. The
handset display shows the call duration
both during your call and for a few
seconds after it is completed.
button or replace the
button.
button at the end
button until
LNR
button to dial.
END CALL
11