Transferring Calls; Between Handsets - BT Diverse 2010 User Manual

Making and

transferring calls

between handsets

If you have multiple handsets registered
with the base, the Diverse 2010 enables
two handsets to talk to each other on
an internal 'intercom' call, while a third
handset can be on an external call.
To page a handset from the base station
To locate handsets that are away from
the base station.
• Press the
GREY
All handsets registered with the base
will ring for 30 seconds.
• To stop paging press the
again.
Or
• Press the
PHONE
handset.
If you have additional handsets, you can
make internal intercom calls between
the handsets.
To make an internal intercom call to
another handset
INT
• Press the
INT
your handset number.
• Enter the number of the handset you
want to call. The handset will ring.
• To end the call, press the
button, or replace the handset on the
base.
12
button on the base.
GREY
button on the
button. Display shows
END CALL
To receive an internal call
• When the handset rings, the display
flashes INT plus the number of the
handset calling you, – 2 in this
example.
• Either press the
simply lift the handset off the base
station to receive the call.
To make an internal call to all
handsets
You can call all handsets registered to a
base station simultaneously.
INT
• Press the
your handset number.
• Press the
ring. The first handset to answer will
button
take the call.
• To end the call, press the
button or replace handset on the base.
If all available handsets are engaged on an
internal call and an external call arrives, a
'call waiting' signal is given. To take the
call, either replace the handset on the base,
or press END CALL.You can accept the
new call when you hear the phone ring.
button, or
PHONE
button. Display shows
INT
button. All handsets will
PHONE