Using Your Diverse 2010 - BT Diverse 2010 User Manual

Using your Diverse 2010

On/Off and Protected
modes
The handset can be set to one of three
different modes. Your handset's display
will indicate which mode it is currently
in, as shown below.
OFF
Phone calls cannot be made and the
handset does not respond to incoming
calls. Nothing is shown on the display.
To switch on, press and hold down the
button until the display is activated.
PWR
ON
You can make and receive calls.
To switch off, press and hold down the
button until the display goes blank.
PWR
10
PROTECTED
The setting stops you accidentally
operating the handset's keypad when
carrying it around. You can still receive
incoming calls but you cannot make
outgoing calls.
To switch to PROTECTED when the
handset is ON
PWR
• Press and release the
If the handset is beyond radio distance of
the base station, the
You cannot make or receive calls until the
handset is brought back within range.
The symbol also flashes for a while after
power-up until the handset automatically
registers to the base.
• Press and release the
again to switch off protected mode.
button.
PWR
symbol f lashes.
button
PWR