Using Your Diverse 2010; With A Switchboard - BT Diverse 2010 User Manual

Using your Diverse 2010

with a switchboard

Your Diverse 2010 can be connected to
all compatible switchboards. For a list
of suitable switchboards, phone the
Diverse Helpline on
Entering access codes
When you use your telephone on a
switchboard you may need to program
a delay for switching calls through to
external lines. You can set this delay to
be inserted automatically when you dial
the switchboard access number, before
the remainder of the number is dialled.
For example, if your switchboard access
number is 9, when you set your access
delay to 9 the pause before dialling
would happen automatically every time
you dial 9 as a first digit. This allows
your switchboard enough time to
allocate you an outside line.
Access codes can be up to three digits
long (select your codes from any
number between
buttons).
Your Diverse 2010 can store up to three
switchboard access codes.
24
0345 908070
and , plus and
1 9
To insert an access code
The handset must be switched ON.
STO
.
• Press the
• Press the
• Press the
• Enter the system code.
(Standard setting is 0000.)
• Press the
press the
satellite PBX system).
• Enter the access code you want to use
(for example
additional access codes, press the
button again, followed by the next
LNR
code, and so on.
• Press the
Notes:
You can enter up to three switchboard access
codes. You may find it useful to enter
(for BT Chargecard access) as one of the
access codes, together with an access pause
#
of six seconds – see 'Setting the access
pause' on the following page.
WXYZ
#
0
LNR
button.
STO
#
button.
button.
0
button (you need to
LNR
button twice for a
LNR
). If you want to enter
'9'
button to confirm.
STO
9
144