Stand; Removing The Stand - Dell OptiPlex 5260 Service Manual
Hide thumbs
Also See for OptiPlex 5260:
- Stand installation manual (19 pages) ,
- Setup and specifications manual (45 pages) ,
- Installation manual (15 pages)
Table of Contents
Advertisement
3
Install the Stand.
4
Follow the procedure in
Stand
Removing the stand
The following procedure applies only to systems that are shipped with a Height adjustable stand (HAS) stand :
1
Follow the procedure in
2
To avoid damaging the display, place the system on a flat, soft, and clean surface .
3
To remove the stand:
a
Press and slide the release tab forward on the cover [1].
b Hold the tab in the release position and lift the stand upward [2].
c
Slide downward to lift the stand off the back cover [3].
After working inside your computer
Before working inside your
computer.
Removing and Installing components
21
Advertisement
Table of Contents
