Dell OptiPlex 5260 Service Manual page 88
Hide thumbs
Also See for OptiPlex 5260:
- Stand installation manual (19 pages) ,
- Setup and specifications manual (45 pages) ,
- Installation manual (15 pages)
Table of Contents
Advertisement
b Remove the I/O board cable, I/O-board power cable, and headset port cable from the routing guides on the display assembly
base [2].
c
Remove the two screws (M3x5) securing the I/O board shield to the display assembly base [3].
d Lift the I/O board shield from the display assembly base [4].
4
To remove the I/O board:
a
Remove the headset port cable from the routing guide on the I/O board [1].
b Remove the two screws (M3x5) that secure the I/O board to the display assembly base [2].
c
Lift the I/O board with its cables from the display assembly base [3].
88
Removing and Installing components
Advertisement
Table of Contents
