Input And Output Bracket; Removing The Input And Output Bracket - Dell OptiPlex 5260 Service Manual
Hide thumbs
Also See for OptiPlex 5260:
- Stand installation manual (19 pages) ,
- Setup and specifications manual (45 pages) ,
- Installation manual (15 pages)
Table of Contents
Advertisement
3
Install the following components:
a
Base cover
b
System board shield
c
Back cover
d
Stand
4
Follow the procedure in
Input and Output bracket
Removing the Input and Output bracket
1
Follow the procedure in
2
Remove the following components:
a
Stand
b
Back cover
c
System board shield
d
Base cover
3
Release the PSU cable to remove the Input and Output (I/O) bracket.
4
To release the PSU cable:
a
Remove the single (M3x5) screw securing the power supply socket to the Input and Output (I/O) bracket [1].
b Slide the power supply socket away to remove it from the system [2].
c
Unroute the power supply cables from the retention clips in the chassis [3].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
67
Advertisement
Table of Contents
