Installing The Power Supply Unit -Psu - Dell OptiPlex 5260 Service Manual
Hide thumbs
Also See for OptiPlex 5260:
- Stand installation manual (19 pages) ,
- Setup and specifications manual (45 pages) ,
- Installation manual (15 pages)
Table of Contents
Advertisement
Installing the power supply unit -PSU
1
To install the PSU:
a
Align and slide the PSU, in to the slot on the display assembly base [1].
b Replace the single screw (M3x5) that secures the PSU to the chassis [2].
2
To install the PSU cable:
a
Connect the power supply cable to the socket on the system board [1].
b Route back the power supply cables through the retention clips in the I/O bracket [2].
c
Slide and replace the power supply socket on the chassis [3].
d Replace the single (M3x5) screw securing the power supply socket to the I/O bracket [4].
62
Removing and Installing components
Advertisement
Table of Contents
