j
Heat sink
k
Processor
l
Base cover
m
I/O bracket.
3
Disconnect the following cables from the system board:
•
Power supply unit cable [1]
•
Camera cable [2]
•
Touch cable [3]
•
SIO_power,SIO_signal, UAJ, INT_speaker,DMIC cables [4]
•
LVDC cable [5]
•
Power button board cable [6]
•
PSU fan cable [7]
•
Back light cable [8]
4
Remove the eight screws (M3x5) that secure the system board to the display assembly base [1].
5
Lift the system board off the display assembly base [2].
72
Removing and Installing components