Power Button Board; Removing The Power Button Board - Dell OptiPlex 5260 Service Manual

2 Install the following components:
a I/O bracket
b Base cover
c System board shield
d Back cover
e Stand
3 Follow the procedure in

Power button board

Removing the power button board

1 Follow the procedure in
2 Remove the following components:
a Stand
b Back cover
c System board shield
d Base cover
e PSU
f PSU fan
3 To remove the power button board:
a Open the latch, and disconnect the power button board cable from the system board [1].
b Slide the power button board cable out from under the antenna cables [2].
c Peel off the power button board cable from the display assembly base [3].
d Slide the power button board cable out from under the antenna cables [4].
After working inside your computer.
Before working inside your computer.
Removing and Installing components 79