Problems Relating To Images - Epson EH-TW7400 User Manual

Troubleshooting
Problems relating to im-
ages
Problems when projection
starts
Problems with the remote
control
Problems with the control
panel
Problems with 3D
Problems with HDMI
Network problems
* Because color reproduction differs between monitors and computer LCD screens, the image projected by the
projector and the color tones displayed on the monitor may not match, however this is not a fault.

Problems relating to images

No images appear
Check
Is the projector turned on?
Is the power cord connected?
Are the indicators switched off?
Is an image signal being input?
Are the Configuration menu settings correct? Reset all of the settings.
Problem
No images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
Moving images being projected from a computer are not projected.
"Not supported " is displayed
"No Signal " is displayed
Images are fuzzy or out of focus.
Interference or distortion appears in the images.
The image is truncated (large) or small, or only a part of the image is
projected.
Image colors are not right.
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
Images appear dark.
Projection stops automatically.
The projector does not turn on.
The remote control does not respond.
Cannot make settings on the control panel.
Cannot project correctly in 3D.
HDMI Link does not function.
The device name is not displayed under device connections.
Cannot access the network via wireless LAN.
The image contains static during network projection.
Press the
on the control panel.
Connect the power cord.
Disconnect and then reconnect the projector's power cord.
Check that pressing the power button after connection supplies
the projector with power.
Check that the connected device is turned on. When Messag-
es is set to On from the Configuration menu, image signal mes-
sages are displayed.
*
Remedy
button on the remote control or the
Extended - Display - Messages
s
Reset - Reset All Config
s
76
Page
p.76
p.77
p.77
p.77
p.78
p.78
p.78
p.78
p.79
p.79
p.79
p.80
p.80
p.80
p.81
p.82
p.82
p.82
button
p.65
p.72