Epson EH-TW7400 User Manual page 42

Adjusting the Image
Function
Load Memory
Erase Memory
Rename Memory
Load Lens Position
Erase Lens Position
Rename Lens Position
Loads the saved memory. When you select a memory and press the
button, the settings applied to the current image are replaced with the
settings from the memory.
Erases the registered memory. When you select a memory name and press
the button, a message is displayed. Select Yes, and then press the
button to erase the selected memory.
Changes the memory name. Select the memory name you want to
change, and then press the
the soft keyboard. p.69
s
When you have finished, move the cursor over Finish, and then press the
button.
Loads the registered lens position memory. When you select the lens po-
sition name and press the
lected lens position memory is applied.
Erases the registered lens position memory. When you select a lens posi-
tion name and press the
and then press the button to erase the selected lens position memory.
Changes the lens position memory name. Select the lens position memory
name you want to change, and then press the
position memory name using the soft keyboard.
When you have finished, move the cursor over Finish, and then press the
button.
41
Explanation
button. Enter the memory name using
button, the adjustment value for the se-
button, a message is displayed. Select Yes,
button. Enter the lens
p.69
s