Replacing The Lamp - Epson EH-TW7400 User Manual

Maintenance
b
Remove the air filter cover.
Hook your finger into the tab on the air filter
cover, and remove it from the lens side.
c
Remove the old air filter.
Grip the knob in the center of the air filter
and pull it out.

Replacing the lamp

Warning
When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be
broken. If replacing the lamp of a projector that has been suspended from the ceiling, you should always
assume that the lamp is cracked, and remove the lamp cover with care. When you open the lamp cover,
small shards of glass could fall out. If any shards of glass get into your eyes or mouth, contact a doctor
immediately.
d
Install the new air filter.
Grip the air filter by the knob in the center
and insert it at an angle.
e
Install the air filter cover.
Secure the tab on the outside first, and then
secure the tab on the lens side.
87