Bridge Unit Transport Belt Removals - Lexmark w850 Service Manual

4024-XXX

Bridge unit transport belt removals

1.
Remove the bridge unit rear cover. See
2.
Open the bridge unit top cover assembly.
3.
Remove the bridge unit right shaft assembly. See
page 4-9.
4.
Remove the bridge unit left shaft assembly. See
page 4-10
5.
Remove the bridge unit idler rolls. See
6.
Remove the transport belts (A) from the bridge unit assembly (B).
4-12
Finisher Service Manual
"Bridge unit rear cover removal" on page
"Bridge unit right shaft assembly removal" on
"Bridge unit left shaft assembly removal" on
"Bridge unit idler rolls removal" on page
4-6.
4-11.
A
B