No Punch Waste Box - Lexmark w850 Service Manual

4024-XXX
Step Check
2 Is the sensor (upper media bin full) connected
properly?
3 Perform a test print.
Does the error still occur?

No punch waste box

Step Check
1 Check the sensor (punch waste box present) for
correct operation.
Is the sensor installed properly?
2 Check the sensor (punch waste box set).
Perform sensor (punch waste box set) test.
1. Enter Diagnostics mode.
2. Select FINISHER TESTS.
3. Select Sensor Tests.
4. Select Punch and Staple.
5. Select Punch box set.
Open the finisher front door.
Remove the punch waste box.
Does the display on the operator panel change every
time the sensing area of the sensor (punch waste box
set) is blocked?
3 Is the sensor (punch waste box set properly
connected?
2-92
Finisher Service Manual
Yes No
Replace the Replace the
sensor (upper connection.
media bin full).
Go to "Sensor
(upper media
bin full)
removal" on
page 4-108.
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-118.
Yes No
Go to step 2. Reinstall the
sensor (punch
waste box set.
Go to
(punch waste
box set)
removal" on
page
Go to step 4. Go to step 3.
Replace the Replace the
sensor (punch connection.
waste box set).
Go to "Sensor
(punch waste
box set)
removal" on
page 4-52.
"Sensor
4-52.