Ntp - Xerox WorkCentre 7970 System Administrator Manual

Network Connectivity

NTP

The Network Time Protocol (NTP) synchronizes the internal clocks of computers over a network
connection at system startup and every subsequent 24-hour period thereafter. If your printer uses DHCP
and an NTP server, or if a DHCP server provides Greenwich Mean Time (GMT) offset, these settings are
ignored.
1. In CentreWare Internet Services, click Properties>Connectivity>Setup.
Under Protocol, next to NTP, click Edit.
2.
3. Under NTP Enabled, select Enabled.
4. Select IPV4 Address or Host Name.
5. Under IP Address: Port and Alternate IP Address: Port, type the address and port numbers.
6. Click Save.
7. For the new settings to take effect, restart your printer.
®
62 Xerox WorkCentre
System Administrator Guide
®
7970 Multifunction Printer