Web Viewer; Connecting To The Network Encoder - Samsung SPE-400 User Manual

web viewer

CONNECTING TO THE NETWORK ENCODER

Normally, you would
1. Launch the Internet browser.
2. Type the IP address of the network
encoder in the address bar.
ex) • IP address (IPv4) : 192.168.1.100
http://192.168.1.100
- the Login dialog should appear.
• IP address (IPv6) : 2001:0230:abcd:
ffff:0000:0000:ffff:1111
http://[2001:230:abcd:ffff:::ffff:1111]
-the Login dialog should appear.
If the HTTP port is other than 80
1. Launch the Internet browser.
2. Type the IP address and HTTP port number of the network encoder in the address
bar.
ex) IP address : 192.168.1.100:HTTP Port number(8080)
http://192.168.1.100:8080
- the Login dialog should appear.
Using URL
1. Launch the Internet browser.
2. Type the DDNS URL of the network encoder in the address bar.
ex) URL address : http://www.samsungipolis.com/[Product ID]
- the Login dialog should appear.
34_ web viewer