Table of Contents
Advertisement
network connection and setup
3.
Enter the password.
This is the login password for the
"admin" user who accesses the
network encoder. The default password
is "4321".
4.
Click [OK].
Auto network setup will be completed.
5.
The network encoder will automati-
cally complete the network setting and
restart.
DYNAMIC IP SETUP
Dynamic IP Environment Setup
Example of the Dynamic IP environment
-
If a Broadband Router, with network encoders connected, is assigned an IP ad-
dress by the DHCP server
-
If connecting the network encoder directly to modem using the DHCP protocols
-
If IPs are assigned by the internal DHCP server via the LAN
Checking the Dynamic IP
1.
Run the IP Installer on the user's local
machine to display network encoders
allocated with <Dynamic IP> addresses
in the list.
2.
Select a network encoder in the list,
and click [Manual Set] to check the
<Dynamic IP> of the network encoder.
If you uncheck <DHCP>, you can
change IP or <Port> to <Static>.
30_ network connection and setup
Advertisement
Table of Contents
