Table of Contents
Advertisement
network connection and setup
CONNECTING THE NETWORK ENCODER DIRECTLY TO A
PPPoE MODEM
Network Encoder
1.
Use the cross LAN cable to connect the network cable directly to your PC.
2.
Run the IP Installer and change the IP address of the network encoder so that you
can use the web browser on your desktop to connect to the Internet.
3.
Use the Internet browser to connect to the network encoder.
4.
Move to [Setup] page.
5.
Move to [Network] – [DDNS] and confi gure the DDNS settings.
6.
Move to [Network] – [Interface], and set the network type to [PPPoE].
7.
Connect the network encoder, which was removed from your PC, directly to the
modem.
8.
Restart the network encoder.
M
For registering the DDNS settings, refer to "Registering with DDNS". (page 49)
For confi guring the DDNS settings, refer to "DDNS". (page 49)
For setting the network type, refer to "Interface". (page 47)
24_ network connection and setup
INTERNET
PPPoE Modem
DDNS Server
(Data Center, KOREA)
External Remote PC
Advertisement
Table of Contents
