Table of Contents
Advertisement
Item
URL
IPv4
IPv6
Search
Auto Set
Manual Set
Exit
M
For the IP installer, use only the installer version provided in the installation CD or use the latest
one if available. You can download the latest version from the product website.
STATIC IP SETUP
Manual Network Setup
Run <IP Installer_vX.XX.exe> to display the network encoder search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M
For network encoders found with the IPv6 setting, these buttons will be grayed out as the network
encoders do not support this function.
1.
Select a network encoder in the search
list.
Find the MAC (Ethernet) address labeled
on the rear of the network encoder.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2.
Click [Manual Set].
The Manual Setting dialog appears.
The default values of <IP Address>, <Subnet Mask>, <Gateway>, <HTTP Port>
and <VNP Port> of the network encoder will be displayed.
DDNS URL address enabling access from the external Internet.
However, this will be replaced with the <IP Address> of the network
encoder if DDNS registration has failed.
Scans for network encoders with the IPv4 setting.
Scans for network encoders with the IPv6 setting.
Activated in an IPv6 compliant environment.
Scans for network encoders that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
The IP Installer automatically configures the network settings.
You should configure the network settings manually.
Exits the IP Installer program.
Description
English _27
Advertisement
Table of Contents
