Samsung SPE-400 User Manual page 32

network connection and setup
Port forwarding for the network encoder
If the network encoder (SPE-400) is connected to the router, you must set the port forwarding
for any one channel of the network encoder (SPE-400) to port no. TCP 943.

J
If you don't set properly the TCP 943 port of the router, you cannot get any video stream from
the web page of the network encoder.
TCP 943 port is a port for the Silverlight policy server of a network encoder.
Ex) If the network encoder (SPE-400) is connected to the router
User
Start End
943 943
3000 3000
3001 3001
3002 3002
3003 3003
4520 4520
4521 4521
4522 4522
4523 4523
8080 8080
8081 8081
8082 8082
8083 8083
CH 3 (192.168.1.102)
Web Server Port
VNP Port
RTSP Port
Policy Server Port
32_ network connection and setup
Internet
Broadband Router
Protocol
TCP 192.168.1.100
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.102
TCP/UDP 192.168.1.103
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.102
TCP/UDP 192.168.1.103
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.102
TCP/UDP 192.168.1.103
CH 4 (192.168.1.103)
8082 Web Server Port
4522
3002 RTSP Port
943 Policy Server Port
IP Address
8083
VNP Port 4523
3003
943
CH 1 (192.168.1.100)
Web Server Port 8080
VNP Port 4520
RTSP Port 3000
Policy Server Port 943
CH 2 (192.168.1.101)
Web Server Port 8081
VNP Port 4521
RTSP Port 3001
Policy Server Port 943