Pc Health Status; Frequency/Voltage Control - ECS PM800-M2 Manual

PC Health Status

On motherboards that support hardware monitoring, this item lets you monitor the param-
eters for critical voltages, critical temperatures, and fan speeds.
Shutdown Temperature
CPU Vcore
2.50 V
3.30 V
5.00 V
12.00 V
Voltage Battery
Current System Temp
Current CPU Temp
CPU FAN Speed
CASE FAN Speed
"#$%
: Move
F5:Previous Values
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
System Component Characteristics
These items allow end users and technicians to monitor data provided by the
BIOS on this motherboard. You cannot make changes to these fields.
• CPU Vcore
• Voltage Battery
• Current System Temp
• Current CPU Temp
• CPU FAN Speed
• CASE FAN Speed

Frequency/Voltage Control

This item enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by the kind of processor you have installed in your
system.
CPU Clock Ratio
Auto Detect PCI/DIMM Clk
Spread Spectrum
CPU Clock
CPU Voltage Regulator
DDR Voltage Regulator
"#$%
: Move
F5:Previous Values
Phoenix-AwardBIOS CMOS Setup Utility
PC Health Status
[Disabled]
1.68V
2.51V
3.34V
5.10V
11.84V
8.23V
34°C
29°C
2960 RPM
0
Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6"Fail-Safe Defaults
Phoenix-AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
[10X]
[Enabled]
[Enabled]
[100MHz]
[Default]
[Default]
Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6"Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
RPM
F7:Optimized Defaults
Item Help
Menu Level
F7:Optimized Defaults
!
!
43