Standard Cmos Features - ECS PM800-M2 Manual

28

Standard CMOS Features

This option displays basic information about your system.
Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
!IDE Devices (None)
Your computer has two IDE channels (Primary and Secondary) and each channel can be
installed with one or two devices (Master and Slave). Use these items to
configure each device on the IDE channel.
Press <Enter> to display the IDE submenu
"#$%
IDE HDD Auto-Detection
Press <Enter> while this item is highlighted to prompt the Setup Utility to automatically
detect and configure an IDE device on the IDE channel.
Phoenix-AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy)
Time (hh:mm:ss)
!
IDE Channel 0 Master
!
IDE Channel 0 Slave
!
IDE Channel 1 Master
!
IDE Channel 1 Slave
!
IDE Channel 2 Master
!
IDE Channel 3 Master
Drive A
Drive B
Video
Halt On
Base Memory
Extended Memory
Total Memory
"#$%
: Move Enter: Select
F5:Previous Values
Phoenix-AwardBIOS CMOS Setup Utility
IDE HDD Auto-Detection
IDE Primary Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
: Move Enter: Select
F5:Previous Values
If you are setting up a new hard disk drive that supports LBA mode, more than
one line will appear in the parameter box. Choose the line that lists LBA for an
LBA drive.
Tue, July 11 2003
12:8:59
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5 in.]
[None]
[EGA/VGA]
[All Errors]
640K
261120K
262144K
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
:
IDE Primary Master
[ Press Enter]
[Auto]
[Auto]
0 MB
0
0
0
0
0
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
Item Help
!
Menu Level
Item Help
! !
Menu Level
To auto-detect the
HDD's size, head...on
this channel