ECS PM800-M2 Manual page 45

Modem Ring Resume (Disabled)
Use this item to enable modem activity to wakeup the system from a power saving mode.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of the
month), hour, minute and second to turn on your system. When set to 0 (zero) for the day
of the month, the alarm will power on your system every day at the specified time.
Press <Esc> to return to the Power Management Setup page.
!
IRQs Activity Monitoring (Press Enter)
This screen enables you to set IRQs that will resume the system from a power saving mode.
Primary INTR
IRQ3 (COM2)
IRQ4 (COM1)
IRQ5 (LPT2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
"#$%
: Move
F5:Previous Values
Set any IRQ to Enabled to allow activity at the IRQ to wake up the system from a power
saving mode.
Press <Esc> to return to the IRQ/Event Activity Detect page.
Phoenix-AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
[ON]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults
Using BIOS
Item Help
!
!
Menu Level
F7:Optimized Defaults
41