ECS PM800-M2 Manual page 38

34
!
AGP & P2P Bridge Control (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
"#$%
AGP Aperture Size (128M)
This item defines the size of the aperture if you use an AGP graphics adapter. The AGP
aperture refers to a section of the PCI memory address range used for graphics memory. We
recommend that you leave this item at the default value.
AGP 2.0 Mode (4X)
This item allows you to enable or disable the caching of display data for the processor video
memory. Enabling AGP-4X Mode can greatly improve the display speed. Disable this item
if your graphics display card does not support this feature.
AGP Driving Control (Auto)
This item is used to signal driving current on AGP cards to auto or manual. Some AGP cards
need stronger than normal driving current in order to operate. We recommend that you set
this item to the default.
•
AGP Fast Write (Disabled)
This item lets you enable or disable the caching of display data for the video memory of the
processor. Enabling this item can greatly improve the display speed. Disable this item if
your graphics display card does not support this feature.
VGA Share Memory Size (64M)
These items allows you to select the shared memory size for VGA usage.
Press <Esc> to return to the Advanced Chipset Features page.
Phoenix-AwardBIOS CMOS Setup Utility
AGP & P2P Bridge Control
AGP Aperture Size
AGP 2.0 Mode
AGP Driving Control
X AGP Driving Value
AGP Fast Write
VGA Share Memory Size
: Move Enter: Select
F5:Previous Values F6:Fail-Safe Defaults
AGP Driving Value: When AGP Driving Control is set to Manual, use this item
to set the AGP current driving value.
[128M]
[4X]
[Auto]
DA
[Disabled]
[64M]
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F7:Optimized Defaults
Using BIOS
Item Help
! !
Menu Level