ECS PM800-M2 Manual page 40

36
! VIA OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
"#$%
OnChip SATA (Enabled)
This option allows you enable or disable the onboard Serial ATA device.
SATA Mode (IDE)
Use this item to select the mode of the Serial ATA.
IDE DMA transfer access (Enabled)
This item allows you to enable the transfer access of the IDE DMA then burst onto the PCI
bus and nonburstable transactions do not.
OnChip IDE Channel0/1(Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated on the
mainboard.
IDE Prefetch Mode (Enabled)
The onboard IDE drive interfaces supports IDE prefetching, for faster drive access. If you
install a primary and secondary add-on IDE interface, set this field to Disabled if the
interface does not support prefetching.
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you
assign which kind of PIO (Programmed Input/Output) is used by IDE devices. Choose Auto
to let the system auto detect which PIO mode is best, or select a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave device. This mainboard supports
UltraDMA technology, which provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on this list to
Auto. You may have to install the UltraDMA driver supplied with this mainboard in order to
use an UltraDMA device.
Phoenix-AwardBIOS CMOS Setup Utility
VIA OnChip IDE Device
OnChip SATA
SATA Mode
IDE DMA transfer access
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
IDE HDD Block Mode
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
[Enabled]
[IDE]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
F7:Optimized Defaults
Using BIOS
Item Help
! !
Menu Level