Combine Original Sets (Adding Originals) - Fuji Xerox ApeosPort-IV C4430 User Manual

3 Copy
Note

Combine Original Sets (Adding Originals)

Use this feature when you copy a document that has too many pages to be loaded in
the document feeder at one time, or when you scan each document page using the
document glass and have the machine process the pages as one job.
When you use this feature, [Next Original] is always selected on the screen during
scanning documents with the document feeder or the document glass.
If [Copy Output] is set to [Auto], the output is automatically sorted.
When all documents have been scanned, select [Last Original].
Note
1
Select [Combine Original Sets].
3
2
Select [On].
Off
Disables this feature.
On
Enables this feature.
Original Orientation
Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder.
136
• You can also press the <Start> button on the control panel to perform the same operation.
• After the first original set is copied, the machine automatically outputs the data remained if
the machine is left unused for the period specified in [Auto Clear]. For more information on
[Auto Clear], refer to "5 Tools" > "Common Service Settings" > "Machine Clock/Timers" >
"Auto Clear" in the Administrator Guide.
• If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.