Programming; Uploading A Vt Pro-E Project - Crestron STX-1550CW Operation Manual

Crestron STX-1550CW

Programming

Operations Guide - DOC. 5849
Wall Mount 2-Way RF Compact Color Touchpanel
Return Button
Select the RETURN button, located at the lower right corner of the Setup Menu,
after setup parameters have been set.

Uploading a VT Pro-e Project

VT Pro-e is a Windows compatible software package for creating Crestron
touchpanel screen designs. Refer to "Software" on page 2 for additional details.
To upload a project, refer to the figures shown below and on the next page for typical
connection diagrams. Complete the following steps provided to ensure proper
connection to the system.
NOTE: If the control system in use has a 4-pin network connector rather than a
modular (RJ11-type) NET connector, use a ST-CBL (sold separately) or make a
cable. Refer to the programming cable specifications diagram on the next page.
Typical Connection Diagram when Loading a Program from the CNMSX-AV/Pro or
CNRACKX/-DP
CRESTRON
ST-CBL
(SOLD SEPARATELY)
COMPUTER
NET
CONTROL
2 4 Y Z G
SYSTEM
Wall Mount 2-Way RF Compact Color Touchpanel: STX-1550CW
TOUCHPANEL
UNITS IN THIS ILLUSTRATION
ARE NOT DRAWN TO SCALE.
AC POWER PACK
(CRESTRON MODEL
OR EQUIVALENT)
PC
SERIAL
PORT
NOTE:
9