Upload System - Crestron D3 PRO Reference Manual

™
Crestron D3 Pro
Reference Guide – DOC. 5998a
Click Continue to finish the compile operation and upload the system.
The program will be saved as an SMW file in the \Programs subfolder, and contains
all the logic that enables communication between the control system, interfaces,
controlled devices and other hardware.
If any errors are generated during programming, they will be displayed in the
Messages field. You can double-click a message for more information.

Upload System

Once you have compiled the program files, you are ready to upload them to the
control system and user interfaces:
1. Click the Upload System button to poll the network and display the list of
target devices that require uploading. If the control system and interfaces
have been detected on the network (and thus can receive files) they will be
checked off. You can click Automatically compile modified files to
recompile the program before upload in case the program has been modified.
2. You can double-click any device in the upload list to view or change its
connection settings. For example, if the PAC2 is connected to the PC via
TCP/IP, then you would select TCP/IP as the connection type for the PAC2,
and enter its IP address.
Software
Crestron D3 Pro™• 93