Copy/Paste Steps And Button Logic - Crestron D3 PRO Reference Manual

™
Crestron D3 Pro
Reference Guide – DOC. 5998a
G P
LOBAL RESETS
Global presets have two commands: Run and Cancel. The Run command starts all
the actions defined in the preset. The Cancel command cancels any actions that have
not yet been issued, i.e., steps with delays that have not yet come due (actions such as
lighting fades that have already started are not affected). Global presets are described
in detail later in this section.
D3 P S
RO CHEDULER
The D3 Pro Scheduler has numerous commands that enable the end user to edit the
properties of scheduled events via a touchpanel. D3 Pro provides Scheduler pages in
all its VisionTools Pro-e templates and automatically assigns these commands to
buttons if you schedule events. Thus, except for the Enable and Disable commands,
you should disregard the other Scheduler commands. Enable and Disable are digital
commands that turn the Scheduler on and off.

Copy/Paste Steps and Button Logic

D3 Pro allows you to cut, copy, paste all button programming information. Thus it is
possible to copy button logic from one interface and paste it onto another interface's
button. The logic includes the button model, programming steps for all associated
events, and feedback definition. You can also delete all logic from the button.
D3 Pro also allows you to cut, copy, paste and delete individual steps or all the steps
in the Event tab. This makes it convenient to move logic around in your program
without need to re-define actions.
To cut, copy or delete button logic, right-click the button and select the desired action
from the submenu.
Software
Crestron D3 Pro™• 63