Engraving Options - Crestron D3 PRO Reference Manual

Software
16 • Crestron D3 Pro™
The Advanced tab allows you to re-compile a touchpanel project, which will
overwrite any changes or customization done to the project in Programming View or
Finish View. Select the Rebuild interface project check box and click OK to
completely rebuild the touchpanel project from the selected template.

Engraving Options

If you add a user interface that can be engraved, a graphic of that interface will be
shown in the program detail area in the center of the screen with the engravable areas
outlined by dotted rectangles.
You can right-click a button on the interface graphic and select an engraving option
from the submenu. Depending on the interface, you may have the option to select a
faceplate/trim color combination. You can also show or hide engravable areas by
toggling Show Text Area Outlines on the submenu.
Engraving Options for the CNX-B6
The right-click submenu provides a WYSIWYG (What You See is What You Get)
print option that allows you to print an interface just as it appears on the screen,
except that the faceplate color is always white.
Before printing, select or clear the attributes you want to view or hide. For example,
if you want to hide the dotted lines around the engravable areas, verify that Show
Text Area Outlines is not selected.
When the interface appears the way you want, right-click the interface and select
Print Panel from the submenu.
When you set engraving attributes, those attributes are automatically saved to an .egr
file in your system's \Engraver subfolder. You can email the .egr file to
engraving@crestron.com for processing and engraving.
Crestron D3 Pro
Reference Guide – DOC. 5998a
™