Hyundai H-1 2005 Owner's Manual page 84

3
STARTING AND OPERATING
16
Switch position
o 2H(Rear-wheel drive)
When driving on normal roads and
highway.
o 4H(High range 4-wheel drive)
When driving deep snow, sand or rough
roads with normal speed. The 4WD
indication light "HI" will be turned on to
remind you that you are in the 4H
mode.
o 4L(Low range 4-wheel drive)
When driving up or descending steep
slopes or rough roads such as muddy
road. Especially when increased drive
power is required.
The indication light "LO" will be turned
on to remind you that you are in the 4L
mode.
!
CAUTION:
Do not select 4WD mode on dry
paved roads. Especially on dry high
way, never select the 4WD(4H or
4L).
Four-wheel driving on dry paved
roads for a long period will increase
the fuel consumption with possible
noise generation and early tire wear.
In addition, differential oil tempera-
ture increases with possible driv-
ing system part wear.
D090B01P-GAT
Manual vacuum type free wheel
hubs (If installed)
1
2
D090B01P
The hubs are set to either the "FREE"
position or the "LOCK" position by
turning the handle.
1. FREE - This position is for rear wheel
drive.
2. LOCK - This position is for four wheel
drive.
Bring the vehicle to a complete stop,
adjust the free wheel hubs to Lock
(Free) position, and then resume driv-
ing. And select transfer shift switch to
desired mode.