2. Remove the mounting screws of the
rear combination light with a phillips
screwdriver.
HSRFL277
3. Disconnect the power cord from the
bulb base in the back of the rear
comdination light.
(1)
(2)
HSRFL278
CORROSION PREVENTION AND APPEARANCE CARE
4. To replace the rear combination
light, remove it from the bulb holder
and install the new bulb.
(1) Rear turn signal light
(2) Stop/Tail light
Tail gate
1. Open the tail gate.
HSRFL279
2. Remove the plastic cover with pull-
ing it.
IN CASE OF EMERGENCY
(1)
(2)
HSRFL293
3. To replace the rear combination light,
remove it from the bulb holder and
install the new bulb.
(1) Back up light
(2) Stop/Tail light
4
4
33
33