Hyundai H-1 2005 Owner's Manual page 55

B170A04A-AAT
HEIGHT ADJUSTABLE FRONT
SEAT SHOULDER BELT
(If installed)
B170A01A
You can adjust the height of the front
shoulder belt anchor to one of the 4
positions.
If the height of the adjusting seat belt is
too near your neck, you will not be
getting the most effective protection.
The shoulder portion should be ad-
justed so that it lies across your chest
and midway over your shoulder near-
est the door and not your neck.
To adjust the height of seat belt an-
chor, lower or raise the height adjuster
into an appropriate position. To raise
the height adjuster, pull it up. To lower
it, push it down while pressing the
height adjuster button.
Release the button to lock the anchor
into position. Try sliding the release
button to make sure that it has locked
into the position.
!
WARNING:
o The height adjuster must be in
the locked position whenever the
vehicle is moving.
o The misadjustment of height of
the shoulder belt could reduce
the effectiveness of the seat belt
in a crash.
BEFORE DRIVING YOUR VEHICLE
B180A02A-GAT
Driver's and Passenger's 3-Point
System with Webbing Clamp
Locking Retractor (If installed)
To Fasten Your Belt
B180A01L
To fasten your seat belt, pull it out of
the retractor and insert the metal tab
into the buckle. There will be an au-
dible "click" when the tab locks into the
buckle.
The seat belt automatically adjusts to
the proper length only after the lap belt
is adjusted manually so that it fits
snugly around your hips. If you lean
forward in a slow, easy motion, the belt
will extend and let you move around.
1
41