Hyundai H-1 2005 Owner's Manual page 164

G080E01P-GAT
o Vacuum and Crankcase
Ventilation Hoses
Inspect the surface of hoses for evi-
dence of heat and/or mechanical dam-
age. Hard and brittle rubber, cracking,
tears, cuts, abrasions, and excessive
swelling indicate deterioration. Particu-
lar attention should be paid to examin-
ing those hose surfaces nearest to
high heat sources, such as the ex-
haust manifold.
Inspect the hose routing to assure that
the hoses do not come in contact with
any heat source, sharp edges or mov-
ing component which might cause heat
damage or mechanical wear. Inspect
all hose connections, such as clamps
and couplings, to make sure they are
secure, and that no leaks are present.
Hoses should be replaced immedi-
ately if there is any evidence of dete-
rioration or damage.
G080F01P-GAT
o Fuel Hose, Vapor Hose and
Fuel Filler Cap
The fuel hose, vapor hose and fuel
filler cap should be inspected at those
intervals specified in the maintenance
schedule. Make sure that a new fuel
hose, vapor hose or fuel filler cap is
correctly replaced. Consult your
Hyundai dealer if you have any ques-
tions.
G080G01P-GAT
o Air Cleaner Filter
A genuine Hyundai part is recom-
mended for replacement of the air
cleaner filter.
G080H01P-GAT
o Spark Plugs (Gasoline)
Make sure to install new spark plugs of the
correct heat range.
VEHICLE MAINTENANCE REQUIREMENTS
G080I01P-GAT
o Drive Belts
Inspect all drive belts (water pump and
alternator) for evidence of cuts, cracks,
excessive wear or oiliness, and re-
place if necessary. Drive belts should
be checked periodically for proper ten-
sion and adjusted as necessary.
G080J01P-GAT
o Engine Coolant
The coolant should be changed at
those intervals specified in the Vehicle
Maintenance Requirements Section.
G080K01P-GAT
o Timing Belt
Inspect all parts related with the timing
belt for damage and deformation. Re-
place any damaged parts.
6
13