1 October, 1999
PAPER FEED
2.6.10 PAPER REGISTRATION
[A]
[B]
[C]
[D]
G038D702.WMF
G038D704.WMF
The drive from the main motor [A] is transmitted to the registration roller through
the registration clutch gear [B].
The registration sensor [C] is used for correcting paper skew and for detecting
paper misfeeds.
The cleaning pad [D] contacts the registration roller. It removes paper dust from the
registration roller so that this dust will not transfer into the development unit through
the drum cleaning unit.
The amount of paper buckle at the registration roller to correct skew can be
adjusted with the printer service mode (Service Menu 2: Regist Sag).
Cross-reference: Section 4.2 Service Program Mode
2-33