Table of Contents
Advertisement
PAPER FEED AND REGISTRATION
1 October, 1999
6.6.7 UPPER RELAY SENSOR
[A]
[E]
G038R900.WMF
[B]
[F]
[D]
[C]
G038R519.WMF
1. Remove the optional duplex and by-pass tray unit, if these unit have been
installed.
2. Remove the right cover. (See ID Sensor.)
3. Remove the right lower cover [A] (2 screws).
4. Remove the guide plate [B].
5. Remove the bracket [C] (1 screw).
6. Remove the guide plate [D] (2 screws).
7. Remove the sensor bracket [E] (1 screw).
8. Remove the first paper transport sensor [F] (1 connector).
6-14
Advertisement
Table of Contents
