PCBS AND MOTORS
1 October, 1999
6.8.6 TONER BOTTLE MOTOR
[B]
[A]
G038R571.WMF
[C]
[D]
G038R777.WMF
[E]
1. Remove the optional finisher and/or bridge unit, if these units have been
installed.
2. Remove the front cover [A] (2 pins).
3. Swing up the toner bottle lever. Then, remove the inner cover [B] (5 screws).
4. Remove the paper exit tray [C] (1 hook [D]).
5. Remove the toner bottle motor [E] (1 connector).
6-28