INSTALLING OPTIONAL UNITS
3.2.3 HARD DISK (HDD)
1. Remove the controller cover [A]
(6 screws), and the rear cover [B] (5
screws).
2. Remove the cover bracket [C] (2 screws).
3. Install the hard disk unit [D] to the upper
socket of the printer controller.
4. Reinstall the rear cover and the controller
cover.
End of procedure
[B]
[A]
[D]
3-6
1 October, 1999
G038R765.WMF
[C]
G038I510.WMF