Table of Contents
Advertisement
LASER UNIT
6.1.2 LASER UNIT
[C]
[A]
ø
WARNING
Turn off the main switch and unplug the machine before attempting any of
the procedures in this section. Laser beams can seriously damage your
eyes.
1. Remove the optional finisher and/or bridge unit, if these units have been
installed.
2. Remove the front cover [A] (2 pins).
3. Remove the right front cover [B] (1 screw).
4. Swing up the toner bottle lever. Then, remove the inner cover [C] (5 screws).
5. Remove the paper exit tray [D] (1 hook [E]).
[B]
G038R161.WMF
[D]
[E]
6-2
1 October, 1999
G038R162.WMF
Advertisement
Table of Contents
