Power Interposer Board; Removing The Power Interposer Board - Dell E30S Series Owner's Manual

Figure 90. Installing a cabled PSU
1. screw
3. non-redundant PSU
5. P2 power cable connector
7. P1 power cable connector
Next steps
Follow the procedure listed in the After working inside your system section.

Power interposer board

Removing the power interposer board

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
150 Installing and removing system components
2. PSU cage
4. standoff on the chassis
6. P1 signal cable connector
8. P4/backplane connector