Installing The Internal Hard Drive Bay - Dell E30S Series Owner's Manual

1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the #2 Phillips screwdriver ready.
3. Follow the procedure listed in the Before working inside your system section.
4. Disconnect the data and power cable(s) from the hard drive(s).
Steps
1. Loosen the two captive screws securing the internal hard drive bay to the chassis.
2. Lift the internal hard drive bay up and out of the chassis.
Figure 40. Removing the internal hard drive bay
Figure 41. Removing the internal hard drive bay
a. cabled hard drives (4)
b. captive screws (2)
c. internal hard drive bay
Next steps
Follow the procedure listed in the After working inside your system section.

Installing the internal hard drive bay

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the #2 Phillips screwdriver ready.
Installing and removing system components 95