Table of Contents
Advertisement
7 (°C)
To set segment
7 (% RH)
To set segment
SHIFT
This page is visualized
• Press
repeatedly
WARNING!
If you have accidentally saved the same segment twice, correct the number on this page.
Temperature 30°C
Duration 2h - Maintenance
Durat.
Wait duration
Channel 1
Control
Wait set point
Max speed
Set point
Grad.
Near set
Humidity from 95%
Duration 2h - Maintenance
Channel 2
Control
Wait set point
Max speed
Set point
Grad.
: 0.00 RH %/min
Near set
Water recharge:
Not used:
Not used:
SP. hum. CTRL.
Save segment
ENTER
Save segment
Total segment
Confirm progr
EDIT PROGRAM
< ESC > Prev. menu
Segment N. 8
H1
hh : mm : ss
2
: 00 : 0
: ON
H2
: ON
: OFF
: OFF
H3
: 30.00 °C
: 0.00 °C/min
: 1,00 °C
H4
: ON
: OFF
: OFF
H5
: 95.00 RH %
: 3,00 RH %
H6
OFF
OFF
OFF
ON
H7
: SAVE
: OFF
: 0
: OFF
H8
28
7
55
30
Because the same temperature value
is maintained
90
Unreal gradient which enables maxi-
mum speed to be obtained
To improve the system performance
(experimentally determined)
to save the programmed segment
When this page is visualized, if the previ-
ously described operations have been
carried out, the segment has been saved
and therefore must not be saved again.
Move on to the next step.
Wait for this number to appear
55
95
7
Hide quick links:
Advertisement
Table of Contents
